Difference between revisions of "Projection"

From CsWiki
Jump to: navigation, search
Line 1: Line 1:
 +
using Projector in conference rooms:
  
 +
There are two main options to display an image on the projectors - by local connection or by the network.
  
using Projector in conference rooms:
+
== network usage (recommended) [OSX\Windows]==
there are two main options for displaying, by local connection or by the network.
+
1) you'll need to download and install EasyMP Network Projection:
'''for network usage (recommended):''''''Bold text'''
+
installation may be found here[http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=35942&infoType=Downloads]
you'll need to download and install EasyMP Network Projection:
+
2) turn on the projector, and Tap the LAN button on the the remote control. after the projector is turned on, the IP adress of it should appear.
installation may be found here for win[http://esupport.epson-europe.com/FileDetails.aspx?lng=en-GB&data=0ccCGROWIYMPKbDKapyALxgRcMe2mH4gcBVzCYy8eOEU003D&id=378713]
+
3) if there is no IP address, go to the local projection option described below.
or for OSX[http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=35942&infoType=Downloads]
+
4) run the easyMP Network Projection
for local usage(using RGB\HDMI port) all you need is connect the cable to the RGB\HDMI port on your laptop,
+
5) choose Advanced Connection Mode
and choose the Computer on the top part of the remote control.
+
6) click Manual Search
 +
7) enter the IP address that appears on the projection screen.
 +
8) click on connect.
 +
9) after the projection is done, click on disconnect.
 +
== local usage ==
 +
1) turn on the projector and tap the Computer on the top left part of the remote control.
 +
2) connect the cable to the RGB\HDMI port on your laptop.
 
if there is no Image displayed - press the following buttons in your laptop (depending on your manufacturer):
 
if there is no Image displayed - press the following buttons in your laptop (depending on your manufacturer):
 
Dell - Fn+F8.
 
Dell - Fn+F8.

Revision as of 18:07, 11 September 2014

using Projector in conference rooms:

There are two main options to display an image on the projectors - by local connection or by the network.

network usage (recommended) [OSX\Windows]

1) you'll need to download and install EasyMP Network Projection: installation may be found here[1] 2) turn on the projector, and Tap the LAN button on the the remote control. after the projector is turned on, the IP adress of it should appear. 3) if there is no IP address, go to the local projection option described below. 4) run the easyMP Network Projection 5) choose Advanced Connection Mode 6) click Manual Search 7) enter the IP address that appears on the projection screen. 8) click on connect. 9) after the projection is done, click on disconnect.

local usage

1) turn on the projector and tap the Computer on the top left part of the remote control. 2) connect the cable to the RGB\HDMI port on your laptop. if there is no Image displayed - press the following buttons in your laptop (depending on your manufacturer): Dell - Fn+F8. IBM/Lenovo/Sony - Fn+F7. Apple - Alt+F1. HP/NEC - Fn+F4. Fujitsu - Fn+F10. Toshiba - Fn+F5.