using Projector in conference rooms:
There are two main options to display an image on the projectors - by local connection or by the network.
network usage (recommended) [OSX\Windows]
1) you'll need to download and install EasyMP Network Projection: installation may be found here 2) turn on the projector, and Tap the LAN button on the the remote control. after the projector is turned on, the IP adress of it should appear. 3) if there is no IP address, go to the local projection option described below. 4) run the easyMP Network Projection 5) choose Advanced Connection Mode 6) click Manual Search 7) enter the IP address that appears on the projection screen. 8) click on connect. 9) after the projection is done, click on disconnect.
1) turn on the projector and tap the Computer on the top left part of the remote control. 2) connect the cable to the RGB\HDMI port on your laptop. if there is no Image displayed - press the following buttons in your laptop (depending on your manufacturer): Dell - Fn+F8. IBM/Lenovo/Sony - Fn+F7. Apple - Alt+F1. HP/NEC - Fn+F4. Fujitsu - Fn+F10. Toshiba - Fn+F5.